Water & Environmental > BOD/COD/Toxicity > COD System 220/240V 50Hz
COD System 220/240V 50Hz
Product code: WAG-WE20200
Chemical Oxygen Demand (COD) is a vital test for assessing the quality of water. The COD predicts the oxygen requirement of the water and is used for the monitoring and control of discharges and for assessing treatment plant performance.
- Carries out tests quickly and effectively
- Offered in four ranges from 5mg/1 to 20,000mg/1
- Allows 24 tubes to be digested at the same time
- Reagents comply and meet international standard methods and requirements
The Wagtech COD System offers a method which is both practical and convenient. The reagents are supplied pre-mixed and pre-dispensed into borosillicate glass test tubes. The test is simply carried out by adding 2ml of sample to the tube, closing the cap and then digesting for two hours at 150°C. The tubes are then cooled and the sample is measured using a Wagtech Photometer.
Specification
Wagtech COD System:
Supplied complete with COD Dry-block heater, safety screen, test tube rack, wagtech Digital Photometer 7100, adaptor, thermometer and micropipettor. An optional rugged carrying case is available should the system need to be taken to remote areas.
Accessories
Product Accessories
WAG-WE20230 |
Rugged carrying case |
Wag-WE20232 |
COD System Packs: Mercury-Free (packs of 24 tubes) |
Wag-WE20234 |
COD System Packs: Mercury-Free (packs of 24 tubes) |
Wag-WE20236 |
COD System Packs: Mercury-Free (packs of 24 tubes) |
Wag-WE20238 |
COD System Packs: Mercury-Free (packs of 24 tubes) |
WAG-WE20240 |
COD System Packs: With Mercuric Sulphate (packs of 24 tubes) |
WAG-WE20242 |
COD System Packs: With Mercuric Sulphate (packs of 24 tubes) |
WAG-WE20244 |
COD System Packs: With Mercuric Sulphate (packs of 24 tubes) |
WAG-WE20246 |
COD System Packs: With Mercuric Sulphate (packs of 24 tubes) |
