Water & Environmental > Water Test Kits > Portable Hydrocarbon Analyser
Portable Hydrocarbon Analyser
Product code: WAG-WE10780
The Wagtech Portable Hydrocarbon Analyser is designed to measure ppm levels of petroleum hydrocarbons in water and also to meet field monitoring requirements.
In the analytical mode, it gives fast and accurate quantitative data for petroleum hydrocarbons in water. The data for petroleum correlates very well with laboratory gas chromatographic analysis. In the screening mode, it offers fast relative data on petroleum hydrocarbon contamination, tracking field gas chromatograph data for TPH, and responds strongly to BTEX components. The unit works equally well for ground water, surface water, waste water, and soil samples.
- Provides in-situ real time information
- Pays for itself with lower analysis costs
- Reduces sample collection
- Logs data from 100 samples
- Easy to calibrate
- Serial output to laptop or printer
Typical applications include:
- Site assessment
- Waste water monitoring
- Leak detection for buried fuel tanks
- Well plume monitoring
- Spill control
- Remediation monitoring
Specification
The Hydrocarbon Analyser is supplied complete with calibration solution, charger, interface cable and a professional ait/water tight rugged carrying case.
| Operating range | 0-2000 ppm as TPH |
|---|---|
| Lower limit of detection | 0.1 ppm as xylene |
| Hydrocarbons detected | C6 and higher MW petroleum hydrocarbons |
| Accuracy/precision |
±10% of reading |
| Response time (initial) | <5 seconds |
| Response time (to 95%) | <5 seconds |
| Operating temperature range | 0° to 50°C |
| Trend correlation with GC data | 95% |